Language selection

Air transportation safety investigation A21C0088

TSB has completed this investigation. The report was published on 23 March 2022.

Table of contents

Rollover upon landing

Canadian Helicopters Limited, (dba Acasta HeliFlight Inc.)
Bell 206L-1 (helicopter), C-GIKX
Hope Bay Aerodrome, Nunavut, 8 NM SSW

View final report

The occurrence

On , a Bell 206L-1 helicopter operated by Canadian Helicopters Limited (doing business as Acasta HeliFlight Inc.), was conducting a flight from Hope Bay Aerodrome (CHB3), Nunavut to a drill camp located 8 nautical miles south-southwest of the aerodrome. Upon landing, the helicopter rolled over. The pilot, who was the sole occupant, shut down the engine and exited the helicopter uninjured. A person on the ground was fatally injured.

Media materials

News release


Investigation report: Dynamic rollover near Hope Bay Aerodrome, Nunavut
Read the news release

Investigation information

Map showing the location of the occurrence


Photo of Ray McNabb

Mr. Ray McNabb joined the TSB in 2015 and is a Senior Technical Investigator Air Central Region office located in Winnipeg. Mr. McNabb worked for Transport Canada Aircraft Services Directorate for 23 years. He joined Aircraft Services as an Aircraft Maintenance Engineer and held the position of Regional Team Lead before leaving to join TSB.

Prior to joining Aircraft Services Mr. McNabb held various positions maintaining numerous types of aircraft. Mr. McNabb has extensive experience in the Repair and Overhaul of Gas Turbine Engines and held the position of Field Service Representative which included Field Service work and troubleshooting throughout North America. He holds a valid class M1 and M2 Aircraft Engineers License and holds a Commercial pilot license with float, ski, and Multi-engine endorsements with 1700 hours of flying experience.

Class of investigation

This is a class 4 investigation. These investigations are limited in scope, and while the final reports may contain limited analysis, they do not contain findings or recommendations. Class 4 investigations are generally completed within 220 days. For more information, see the Policy on Occurrence Classification.

TSB investigation process

There are 3 phases to a TSB investigation

  1. Field phase: a team of investigators examines the occurrence site and wreckage, interviews witnesses and collects pertinent information.
  2. Examination and analysis phase: the TSB reviews pertinent records, tests components of the wreckage in the lab, determines the sequence of events and identifies safety deficiencies. When safety deficiencies are suspected or confirmed, the TSB advises the appropriate authority without waiting until publication of the final report.
  3. Report phase: a confidential draft report is approved by the Board and sent to persons and corporations who are directly concerned by the report. They then have the opportunity to dispute or correct information they believe to be incorrect. The Board considers all representations before approving the final report, which is subsequently released to the public.

For more information, see our Investigation process page.

The TSB is an independent agency that investigates air, marine, pipeline, and rail transportation occurrences. Its sole aim is the advancement of transportation safety. It is not the function of the Board to assign fault or determine civil or criminal liability.